top of page
Waterproofing
Sub Drainage
Pre Formed Membrane
Liquid Range
Cementitious Range
Primers & Adhesives
Accessories
Sub Drainage
Insu® Drain US6P
Drainage for waterproofing membrane
Insu® Drain Series
(8, 10, 20, 30)
Dimple sheet with different thickness available
Insu® Drain Geo Series
(8Geo, 10Geo, 20Geo, 30Geo)
Dimple sheet additional layer of geotextile
Upbond HDPE
Developed for waterproofing applications on the water side in inaccessible substructure spaces
HDPE Membrane
<1 mm for Root Barrier,
≥1 mm Waterproofing Membrane
≥1 mm Waterproofing Membrane
Torch On Membrane
Modified bitumen and reinforced with non-woven polyester fabric, ideal for large surface areas with minimal detailing.
TPO Membrane
Single-ply membrane with polyester reinforcement, offering durable, flexible, and high-performance adhesion for roof surfaces.
PVC Membrane
Reinforced with non-woven glass fibre, offering durability, flexibility, and strong adhesion for large roof areas with minimal detailing.
Self Adhesive
Fully bonded SBS-modified bituminous membrane featuring high-tack resins for superior adhesion to prepared concrete surfaces.
EPDM Membrane
Can be used on roof surfaces or pond liner
Pre Formed Membrane
Liquid Range
Uniseal® Acrylic
Non-toxic, for detailed or hard-to-reach areas. Cures within hours
Uniseal® WB PU
Single-component polyurethane waterproofing membrane for detailed or hard-to-reach concrete areas.
Uniseal® MS PU
Bitumen-modified polyurethane waterproofing membrane that moisture-cures into a tough, seamless layer for concealed concrete applications in harsh environments.
Uniseal® Root Shield
Formulated for green roofs, offering seamless protection and root resistance to prevent membrane puncture.
Uniseal® Anti -Skid
A single-component, water-based acrylic floor coating for concrete, metal, and asphalt surfaces.
Uniseal® Wall Coating
100% water-based acrylic elastomeric coating that provides both waterproofing and decorative protection for exterior surfaces.
Uniseal® Polyurea
Fast-curing, 100% solids, odourless waterproofing coating offering superior durability, elasticity, and UV resistance for both indoor and outdoor applications.
Uniseal® H20 Bloc
Solvent free liquid that reduces water absorption capacity of building materials by 95%.
Primers & Adhesives
Uniseal® Bonding Adhesive
A high-strength polychloroprene rubber adhesive for bonding PVC membranes to substrates, providing excellent durability and heat resistance.
Uniseal® WB Primer
Water-based primer, sealer, and bonding agent for preparing interior or exterior surfaces—new or coated—for waterproofing systems.
Uniseal® Anti Corrosion Primer
A single component, water base primer formulated for use on ferrous metal surfaces
Uniseal® Bitumen Primer
Low-viscosity bituminous primer that enhances adhesion of pre-formed membranes to substrates while protecting concrete from biological growth and contaminated soil.
Cementitious Range
Uniseal® Slurry+
Formulation of cement, quartz sand and activating chemicals.
Uniseal® Flex
Two-component flexible cementitious waterproofing system made of high-grade acrylic polymer and pre-blended fine powder.
Uniseal® Concrete Strengthener
High grade polymer and water based product used as a primer, bonding agent or as a waterproofing slurry.
Others
Uniseal® Patching Compound
A proprietary mix of cement-based, water-resistant repair mix for sealing cracks, joints, and cavities before waterproofing
Uniseal® Adhesive Tape
Thin adhesive tape that bonds easily to Uniseal® UpBond HDPE membranes with applied pressure—no heat, water, or solvent needed. Comes in single or double sided
Uniseal® PU Sealant
A high-modulus polyurethane sealant
bottom of page